Specifications

CHAPTER 7 – REGULATORY COMPLIANCE STATEMENTS
45
Universal Socket Developer Guide
Korea Class B Statement
Equipment (Residential Use)
이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적으로 하며,
모든 지역에서 사용할 수 있습니다.
Japan Requirements
These devices conform to (JATE) Japan Approval Institute for Telecommunications Equipment:
MT5692SMI – JATE Approval A09-0123001
MT9234SMI – JATE Approval AD06-0220001
Note: SocketModems are approved for product development in Japan only if they are removable from the
manufactured product. The SocketModem must not be soldered into place.
Japan requires that your manufactured product documentation include SocketModem installation and removal
instructions as well as connection to the PSTN network. The following text provides general steps to follow.
Installing the SocketModem in your Manufactured Product
1. If applicable, disconnect any power cord and peripherals you may have attached to your manufactured
product.
2. Place the SocketModem on the board of your product. Be sure to match the pins on the SocketModem
with the correct orientation on your board.
3. Be sure that the SocketModem is securely fastened to board so that it cannot come loose while handling
or during shipping. Some examples of fasteners include nylon screws, tie wraps, etc. Remember that you
cannot solder the SocketModem in place.
4. Put the cover on your product and connect the power and peripherals.
Removing the SocketModem from your Manufactured Product
1. Back up the current configuration of your manufactured product if you want to save it.
2. Record any information not stored in the configuration that you may want to reference.
3. Disconnect any power cord and peripherals from your manufactured product.
4. Remove the cover from your product.
5. Gently lift the SocketModem upwards while holding the board in place.
Connecting to the PSTN Network
To connect to a PSTN network, see the Tip and Ring Interface section in your model’s Device Guide.
Other Countries
The above country-specific examples do not cover all countries with specific regulations; they are included to
show you how each country may differ. If you have trouble determining your own country's requirements, check
with Multi-Tech's Technical Support for assistance.