Specifications

AVIDdirector-M2M™ Technical Reference Guide
February 5, 2009 ©AVIDwireless 2004-2009 All Rights Reserved Page 55 of 55
Rev D: JP1 is the DB37 pin 20 jumper that
supplies the VRail output voltage with
maximum current of 0.5A. JP1 1-2
connects VRail to Vin (nominally 12VDC),
JP1 2-3 connects VRail to +5V.
JP2 connect to DB-9 pin 9 to supply
voltage at 0.5A (peak 2A) JP2 1-2 provides
Vin on pin 9. JP2 2-3 provides +5V on pin
9.
Rev F: JP1 is the DB37 pin 20 jumper that
supplies the VRail output voltage with
maximum current of 2A. JP1 1-2 connects
VRail to Vin (nominally 12VDC), JP1 2-3
connects VRail to +5V.
JP2 connects to DB-9 pin 9 to supply
voltage at 0.5A (peak 2A) JP2 1-2 provides
Vin on pin 9. JP2 2-3 provides +5V on pin 9.