Specifications

AVIDdirector-M2M™ Technical Reference Guide
February 5, 2009 ©AVIDwireless 2004-2009 All Rights Reserved Page 44 of 55
# SensorLogic Portal Device UID number for this device
SL.DEVICE_UID=8C71EA041A5741F48A87B314FF02501A
#
# System Settings
SYSTEM.DEBUG=0
SYSTEM.LOGGING=0
SYSTEM.OPTIONS=0
# Level below which we do a GC
SYSTEM.GC_WATERMARK = 100000
SYSTEM.GC_RUN_INTERVAL=3600
#
#
# M2Mlet application class to load
M2MLET.CLASSNAME=com.avidwireless.AVIDdirector.Demo_M2Mlet
#
#
# M2M On device address overriding the default ones
TTL1.M2MXML_ADDRESS=TTL1.AIN
TTL1.IOTYPE=AIN
TTL1.POLLING=Y
TTL2.IOTYPE=AOUT
TTL3.IOTYPE=DOUT
TTL4.IOTYPE=DOUT
TTL5.M2MXML_ADDRESS=TTL5.DIN
TTL5.IOTYPE=DIN
TTL5.POLLING=Y
TTL6.M2MXML_ADDRESS=TTL6.DIN
TTL6.IOTYPE=DIN
TTL6.POLLING=Y
#
# M2M_IO Device common settings
M2MIODEVICE.POLLTIME=200
#
#
# Boomer 3 radio
BOOMER3.CLASSNAME=com.avidwireless.radio.Boomer3
BOOMER3.SERIAL_PORT=serial3
# BOOMER3.SERIAL_PORT_BAUDRATE is not needed - Masc fixed at 9600 baud
BOOMER3.SERIAL_PORT_BAUDRATE=9600
# BOOMER3.SLOT=0 Not needed for M2M
# Maximum time to send a message
BOOMER3.MAX_RETRY_COUNT = 8
# Gateway addresses
BOOMER3.MOBITEX_GATEWAY_ADDRESS=103087
BOOMER3.MOBITEX_GATEWAY_HPID=137
#
# Nextel IO1500 Radio
#IO1500.CLASSNAME=com.avidwireless.radio.IO1500
#IO1500.SERIAL_PORT=serial3
#IO1500.SERIAL_PORT_BAUDRATE=19200
#IO1500.SLOT=1
#IO1500.SERVER_ADDRESS=0.0.0.0
#IO1500.PORTAL_SERVLET=/servlet/rfid?_SMR\=RfidMain.Rfid
#
#
# Other IO Devices to load
#
#NEMA GPS Receiver to load
#GPS.CLASSNAME=com.avidwireless.AVIDdirector.iodevice.GPS_NEMA_Receiver
#GPS.SERIAL_PORT=serial1
#
#BPI216 SerialLCD to load
#LCD.CLASSNAME=com.avidwireless.AVIDdirector.iodevice.BPI216_SerialLCD
#LCD.ADDRESS=LCD
#LCD.SERIAL_PORT=serial1
#
#SIRIT RFID Reader