Specifications

AVIDdirector-M2M™ Technical Reference Guide
February 5, 2009 ©AVIDwireless 2004-2009 All Rights Reserved Page 21 of 55
override of a config file entry. There can be multiple -C config=nnn -C config2=mmm -C config3=xxx entered on
the same line.
M2MApp.ini.default
# Config File: M2MApp.ini Updated: 10/22/2008 9:59:12PM
# M2MApp M2MApp Ver:2.0.0(Build:2008102101)[57.10.19.7.10.50.15.39.12]
#
# Master M2MApp.ini file. This contains all IODEvices, Radios and standard M2Mlets.
# Most of them have the .LOAD=false to prevent them from loading. The M2MApp.ini file
#
# Specify the device type, 100 (Rev A or B) or 200 (Rev C)
AVIDIRECTOR.MODEL=200
#
##### System Settings #####
#
SYSTEM.APP_NAME=M2MApp
SYSTEM.DEBUG=0
SYSTEM.LOGGING=0
SYSTEM.OPTIONS=0
# AVIDdirector Unique number (if not set uses device's serial # or phone#)
# SYSTEM.DEVICE_UUID=
# Maximum time without communications with the portal before we auto-reboot - 1 day
# SYSTEM.MAX_NOCOMM_TIME=86400000
# Level below which we do a GC
SYSTEM.GC_WATERMARK = 100000
SYSTEM.GC_RUN_INTERVAL=60
# Watchdog timer reset
SYSTEM.WATCHDOG=true
#
##### M2MXML Settings #####
# Version of M2MXML. Use 1.1, 1.0 or Beta
M2MXML.VERSION=1.1
# M2MXML Server Settings
M2MXML.SERVER_IP_ADDRESS=aviddashboard.com
M2MXML.SERVER_PORT=8088
M2MXML.SERVER_HTTP_SEND_PAGE=/AVIDdirector/Host?msg=
M2MXML.SERVER_HTTP_POLL_PAGE=/AVIDdirector/Host?uuid=
# M2MXML.SERVER_POLL_TIME=180000
# UDP Port received the Messages or Shoulder taps from the server
# M2MXML.SERVER_UDP_PORT=4321
#
##### M2MLET APPLICATION CLASSES #####
#
# Jumpstart Demo Board M2MLet
DEMO_M2MLET.CLASSNAME=com.avidwireless.avidirector.Demo_M2Mlet
DEMO_M2MLET.LOAD=false
DEMO_M2MLET.DEMO_ENABLED=true
# Update specifies when to send data automatically to the Server
# DEMO_M2MLET.DEMO_UPDATE_INTERVAL=60000
#
# Modbus Reader application class to load
MODBUS_M2MLET.CLASSNAME=Modbus_M2Mlet
MODBUS_M2MLET.LOAD=false
# How often we will be reporting in 5 minutes
MODBUS_M2MLET.UPDATE_INTERVAL=120000
# Serial Port Settings
MODBUS_M2MLET.SERIAL_PORT=serial1
MODBUS.SERIAL_PORT_BAUDRATE=9600
MODBUS.SERIAL_PORT_DATABITS=8
MODBUS.SERIAL_PORT_PARITY=None
MODBUS.MODBUS_ASCII=false
MODBUS.MODBUS_RETRY_COUNT=2
MODBUS.MODBUS_POLL_DELAY=1
# MODBUS device address
MODBUS_M2MLET.MODBUS_DEVICE=1
# Starting address for floating analog 32 bit registers we are reading