Owner`s manual

41
Appendixes
Action Commands
A/ Re-execute previous command (no AT prefix required
with this command).
DS n Dial a stored number ( n = 0 thru 9 memory location ).
Ten phone numbers can be stored.
D xxx Number of characters allowed in a telephone number
string . A telephone number xxx may contain a
maximum of 16 characters. Note digital circuits do not
provide the option of either pulse or tone dialing. The
MultiDSU64K, however, will accept either ATDT or
ATDP dialing prefix.
H0 Hang-up (go on-hook)
H1 Go on-line (off-hook)
I ID information
&F Load factory default settings
&Z n = ddd Store a telephone number ddd in phone
number memory
n ( n has ten locations of memory 0
thru 9).
&Z ? Display all telephone numbers.
&Z n ? Display stored phone number ( n = memory location 0
thru 9).
*R Reset the MultiDSU64K
*W Download parameters to remote unit. All S-Registers
S0 through S16; as well as the settings of DIP-
Switches 1, 2, 5 thru 7 and 12 can be loaded to the
remote unit with this command (S-Registers are
described in this subsection).
$ Display HELP information on-screen.