Owner`s manual

MT56DSU2 Owner’s Manual
82017502 13
The factory default settings are indicated by an * in table 2-1.
Table 2-1. MuII1DSU56K Switch Settings
Switch Description
Data Rate (in bps)
2400 4800
9600 19.2K 56K
1 Down Down Down Down Up*
2 Down Up Down Up Up*
3 Down Down Up Up Up*
Clocking
Internal External
DDS
4 Up Down Down *
5 Up Down Up *
RTS Control
6 Up - RTS controlled by DTE
Down - RTS forced On *
DSR Control
7 Up – DSR controlled by DTE
Down – DSR forced on *
Sync / Async Operation
8 Up – Synchronous operation *
Down - Asynchronous operation
Normal / Loopback Test Mode
9 Up – Normal operation *
Down – Loopback Test
Normal / Test Pattern
10 Up – Normal *
Down – Test Pattern
Circuit Assurance Enabled/Disabled
11 Up – Circuit Assurance Disabled *
Down - Circuit Assurance Enabled
System Status Enabled/Disabled
12 Up - System Status Disabled *
Down - System Status Enabled
Async Word Length
9-Bit 10-Bit*
11-Bit
13 Up Down * Up
14 Down Up * Up
Elastic Store Enabled/Disabled
15 Up - Elastic Store Disabled *
Down - Elastic Store Enabled
Anti-Streaming Enabled/Disabled
16 Up - Anti-Streaming Enabled
Down - Anti-Streaming Disabled *
____________________________
* Factory default setting