Specifications
Chapter 5. Inventory
Dim11 191
Fact: (Lower half). Conversion factor.
Rnd: (Lower half). Rounding flag from IM1.D.
9 Repeat Step 8 for each selected field. The cursor stops automatically for you to
make an entry.
10 When all selected fields have been entered, the computer asks at the bottom of the
screen:
<Ent>=Accept Change <Esc>=Reject Change
Press Enter to accept the changes or press Esc to reject them.
11 Depending on the method of adjustment (manual or automatic), you are returned
to either Step 7 to select another item to change or the next item is displayed
automatically in Step 8. Continue making changes as needed.
12 When done, press Esc until you return to the
INVENTORY MENU.
Steps 13-21: Copy from Field to Field
Use this option to move the value in any field in IM2 to any other field in IM2 for a
range of item numbers. These instructions show moving List/Base to Average
Cost.
13 Starting at the
INVENTORY MENU, select 10 for Inventory Special Maintenance and press
Enter. Then select 2 for
Store Data IM2.
14 Select 11 for
Copy Field From/To Field IM2.
15 The computer displays:
DS03911 Move Values DIM11 DATA Date mm/dd/yy
Rev8.0.1 Port 39
Store 01
Select Value To Move From: 0
Select Value To Move To :
1. New Price 8. Price Adj 1 17. Minimum
2. List/Base 9. Price Adj 2 18. Maximum
3. Average Cost 10. Price Adj 3 19. Beg Year Balance
4. Last Cost 11. Price Adj 4 20. Units On Hand
5. Market Cost 12. Price Adj 5 21. EOQ
6. Lifo Cost 13. Price Adj 6 22. Dollar Value
7. Count Cost 14. Price Adj 7 23. Before Count Units
15. Price Adj 8 24. Before Count Dollars
16. Price Adj 9 25. Count Units
26. Count Dollars
<Esc> = End
The cursor is at Select Value To Move From. From the displayed list of fields, enter the
number corresponding to the value you wish to move from (source). If you want to
use List/Base as the source, enter 2 and press Enter.
16
Select Value To Move To:
Enter the number corresponding to the value you wish to move to (destination). If
you want to move List/Base to Average Cost, enter 3 and press Enter.