Specifications

Chapter 1. Hardware Training
10 Dim11
8. You may staple cables to walls but do not staple through the cable shielding.
The slightest damage will render the cable useless.
9. Try not to run too many cables through one small opening. If one needs
replacement, it will be difficult to maneuver a new cable through a small
opening.
10. If the cable run is over 200 feet, you may need a signal booster. If the cable
needs to be run outdoors or underground, special cable may be needed. Please
consult Dimensions in these circumstances.
11. As a final note, please do not consider these cable runs to be permanent. Even
the most careful preparation cannot take into account all possible variables.
Often times, a faulty cable or the change of peripheral location necessitates
adding more cable runs. Please be prepared to string other cables if you and
Dimensions decide it is necessary.