Specifications

Chapter 5. Inventory
Dim11 163
(C)hange Allows you to change the displayed group.
(D)elete Allows you to delete the displayed group.
(N)ext Displays the next group number.
(P)revious Displays the previous group number.
(E)nd Ends this option and returns to the previous menu.
14 Fill in the following fields:
2. Description
Enter up to 20 characters for the group description. This description appears on
sales reports.
3. Assigned Department Number (1-99)
Enter the department to which this group is assigned. For example, department 1
is for lumber and hardware. The computer displays the corresponding department
description for your verification.
15 Then the computer asks if you wish to add or change the entry. Enter Y if the
information is correct and you wish to add it. Or enter N to not add it.
16 Repeat Steps 12-15 for each group to be entered.
17 Press Esc at
Group Number when done. You are returned to the Inventory Descriptions
Menu
.
Steps 18-25 : Section Descriptions
18 When you are done entering group descriptions, you can enter the section
descriptions. From the
Inventory Descriptions Menu, select 2 for Section Descriptions.
19 The computer displays the Section Descriptions screen:
DSVM0302 Section Descriptions DIM11 DATA Date mm/dd/yy
Rev11.0.1 Port 43
Store 01
+---------------------------------------------------+
| 1. Group Number (0-99) |
||
| 2. Section Number (0-99) |
| 3. Section Description |
| 4. Assigned Department Number (1-99) |
||
+---------------------------------------------------+
<Esc>=End <Tab>=Go Forward One Field <F1>=Help
The cursor is positioned at 1. Group Number (1-99). Enter an existing group number.
The computer displays the corresponding group description for your verification.
20
2. Section Number (0-99)
Enter the section number you wish to add or change for the selected group. See
page 151 for more information on sections.