Specifications

Chapter 5. Inventory
162 Dim11
(C)hange Allows you to change the displayed department.
(D)elete Allows you to delete the displayed department.
(N)ext Displays the next department number.
(P)revious Displays the previous department number.
(E)nd Ends this option and returns to the previous menu.
7 Fill in the following field:
2. Description:
Enter up to 28 characters for the department description. This description
appears on sales reports.
8 Then the computer asks if you wish to add or change the entry. Enter Y if the
information is correct and you wish to add it. Or enter N to not add it.
9 Repeat Steps 5-8 for each department description to be entered.
10 Press Esc at
Department Number when done. You are returned to the Inventory
Descriptions Menu
.
Steps 11-17 : Group Descriptions
11 From the Inventory Descriptions Menu, select 1 for Group Information.
12 The computer displays the Group Information screen:
DSVM0302 Group Information DIM11 DATA Date mm/dd/yy
Rev11.0.1 Port 38
Store 01
+---------------------------------------------------+
¦ 1. Group Number (0-99) 0 ¦
¦ 2. Description ¦
¦¦
¦ 3. Assigned Department Number (1-99) ¦
¦¦
+---------------------------------------------------+
Last Used Group Number: 100
<Esc>=End <Tab>=Go Forward One Field <F1>=Help
The cursor is positioned at 1. Group Number (1-99). If there are some group
descriptions entered already, the last used number is also displayed. Enter the
group number you wish to add or change. See page149 for more information on
group numbers.
13 If you entered an existing group number, the computer asks:
(C)hange (D)elete (N)ext (P)revious (E)nd
You have the following options: