Specifications

Chapter 5. Inventory
Dim11 161
Entering Department, Group, & Section Descriptions
1 From the INVENTORY MENU shown above, enter 9 for Inventory Variable File. Remember
to press Enter after making your selection.
2 Select 2 for
Descriptions.
3 The computer displays the
Inventory Descriptions Menu:
DSVM0302 Inventory Descriptions DIM11 DATA Date mm/dd/yy
Rev11.0.1 Port 43
Store 01
Store Number 1
Choose Selection:
+-------------------------------------+
| 1. Group Information |
| 2. Section Descriptions |
| 3. Department Descriptions |
||
| 98. Change Store |
+-------------------------------------+
<Esc>=End
From this menu, you will enter department descriptions first, then group
information, and the section descriptions.
Steps 4-10: Department Descriptions
4 From the Inventory Descriptions Menu, select 3 for Department Descriptions.
5 The computer displays the Department Descriptions screen:
DSVM0302 Department Descriptions DIM11 DATA Date mm/dd/yy
Rev11.0.1 Port 38
Store 01
+---------------------------------------------------+
¦ 1. Department Number (1-99) 0 ¦
¦ 2. Description ¦
+---------------------------------------------------+
Last Used Department Number: 99
<Esc>=End <Tab>=Go Forward One Field <F1>=Help
The cursor is positioned at 1. Department Number (1-99). If there are some department
descriptions entered already, the last used number is also displayed. Enter the
department number you wish to add or change. See page 150 for more
information on department number.
6 If you entered an existing department number, the computer asks:
(C)hange (D)elete (N)ext (P)revious (E)nd
You have the following options: