Owner`s manual

Appendix B - Interface Signals and Connector Pinouts
53
LINE CABLE
DESCRIPTION
This cable lets you connect the MT56DSU-R to your DDS Network.
You can order the Line cable (CA248) from Multi-Tech, or build one
using the instructions below.
SCHEMATIC
BUILD INSTRUCTIONS
1. Strip cable insulation 3/4" .
2. Strip wires 1,3,4 and 8 on one end of cable and 1,2,7 and 8 on
other end a 1/4"
3. Cut unstriped wires off.
4. Solder wire 1 on one connector to 1 on the other.
5. Solder wire 3 on one connector to 2 on he other..
6. Solder wire 4 on one connector to 7 on the other..
7. Solder wire 8 on one connector to 8 on the other..
8. Cover solder connections with 1"of shrink tube.
82023101.p65 2/12/01, 2:52 PM53