Owner`s manual

Chapter 2 - Hardware Installation
21
Table 2-2. Installation (cont'd)
7. To connect the DTE to the MT56DSU-R using a V.35 interface,
connect the V.35 Interface Adapter cable (CADSUR35) supplied
by Multi-Tech to the V.35 interface on the DTE and the other
end to the DB25 connector on the back of the rack. Refer to
Appendix A in this manual for V.35 Interface Adapter cable
information. Refer to the Rack Mounted Modems Owner's
manual for cable connections on the rack.
8. To connect the phone line to the MT56DSU-R using the phone
cable supplied by Multi-Tech, connect the DB9 connector of the
cable to the DB9 connector on the rack and the RJ-48
connector to the wall jack. Refer to Appendix A in this manual
for the phone cable information. Refer to the Rack Mounted
Modems Owner's manual for the DB9 connection on the rack.
82023101.p65 2/12/01, 2:52 PM21