User guide

Part 4 – Commands for the SocketModem iCell, SocketModem IP, and MultiModem iCell Chapter 14
Universal IP AT Commands Reference Guide (Document S000457H) 75
#DIALSELECT – Set Internet Connection Number
Definition: The value of this command determines the number called to establish an Internet connection. It
configures the TCP/IP stack software to use the primary dial-up number or the secondary dial-up
number.
Syntax: Set Value: AT#DIALSELECT=<value>
Get Value: AT#DIALSELECT? or AT#VPHY, AT#VALL
Values: 1 Use primary dial-up number.
2 Use secondary dial-up number
Default: 1
#ISPPW – Set ISP Password
Definition: This parameter sets the password for the ISP account. When communication is initiated and once
the physical (modem) connection has been established with the ISP, the TCP/IP stack software
must provide the ISP with the password associated with the account to be used.
Syntax: Set Value: AT#ISPPW="<value>"
Get Value: AT#ISPPW? or AT#VPPP, AT#VALL
Values: Alpha-numeric ASCII text string up to 64 characters.
Default: None
#ISPUN – Set ISP User Name
Definition: This parameter sets the user name of the ISP account. When communication is initiated and the
physical (modem) connection has been established with the ISP, the TCP/IP stack software must
provide the ISP with the user name associated with the account to be used.
Syntax: Set Value: AT#ISPUN="<value>"
Get Value: AT#ISPUN? or AT#VPPP, AT#VALL
Values: Alpha-numeric ASCII text string up to 64 characters.
Default: None