User guide

Part 4 – Commands for the SocketModem iCell, SocketModem IP, and MultiModem iCell Chapter 14
Universal IP AT Commands Reference Guide (Document S000457H) 70
Chapter 14 – Commands for the
SocketModem iCell, SocketModem
IP, and MultiModem iCell
These commands are for the following products
SocketModem
iCell (MTSMC-G2-IP)
SocketModem IP (MT5692SMI-IP) This SocketModem uses these commands when it is in IP mode.
MultiModem
iCell (MTCMR-G/C/H/E) This MultiModem uses these commands when it is in IP mode.
Set Commands
+WOPEN – Set IP Mode or Modem Mode
Definition: This command sets the mode of operation.
Syntax: Set Value: AT+WOPEN=<value>
View Value: AT+WOPEN? (Displays the current mode of operation).
Values: 0 Modem Mode
1 IP Mode
Default: 1
#AUTHENT – Authentication Type
Definition: This command sets the PPP authentication type: PAP, CHAP, or NONE.
Syntax: Set Value: AT#AUTHENT="<value>"
View Value: AT#AUTHENT? (Displays current PPP authentication type).
Values: PAP
CHAP
NONE
Default: NONE