User guide

Part 3 – Commands Wi-Fi Devices Chapter 13 – WLAN Commands for the SocketWireless Wi-Fi (MT810SWM-IP)
Universal IP AT Commands Reference Guide (Document S000457H) 61
Chapter 13 – WLAN Commands for the
SocketWireless Wi-Fi (MT810SWM-IP)
Set Commands
#WLANSECURITYMODE – Security Mode of WLAN Module
Description: Sets the Wireless LAN security mode.
Note: The module must be reset to put the command into effect.
Syntax: Set Value: AT#WLANSECURITYMODE =<value>
View Value: AT#WLANSECURITYMODE?
Values: 0 Security Disable
1 WEP64 Security
2 WEP128 Security
3 WPA Security
4 WPA2 Security
Default: 0 Security Disable
#WLANNETWORKMODE – WLAN Network Mode
Description: Sets the wireless LAN network mode.
Note: The module must be reset to put the command into effect.
Syntax: Set Value: AT#WLANNETWORKMODE =<value>
View Value: AT#WLANNETWORKMODE?
Values: 0 Infrastructure mode
1 Ad – Hoc mode
Default: 0 Infrastructure mode
#WLANCOUNTRYCODE – Country Code
Description: Sets country code. Different countries have different restrictions on Wireless LAN parameters like
operating channels and transmit power. To make it operable, the country code can be set by
using this AT command.
Note: The module must be reset to put the command into effect.
Syntax: Set Value: AT#WLANCOUNTRYCODE ="<value>"
View Value: AT#WLANCOUNTRYCODE?
Values: Country Code FCC - US:
AT#WLANCOUNTRYCODE="DOMAIN_FCC"
Supported Channels - Channel 1 to channel 11
Country Code IC - Canada:
AT#WLANCOUNTRYCODE="DOMAIN_IC"
Supported Channels - Channel 1 to channel 11
Country Code ETSI - Europe:
AT#WLANCOUNTRYCODE="DOMAIN_ETSI"
Supported Channels - Channel 1 to channel 13
Country Code Spain:
AT#WLANCOUNTRYCODE="DOMAIN_SPAIN"
Supported Channels - Channel 10 to channel 11