User guide

Part 3 – Commands for Wi-Fi Devices Chapter 12 – Telnet Commands for the SocketWireless Wi-Fi (MT810SWM-IP)
Universal IP AT Commands Reference Guide (Document S000457H) 59
Chapter 12 – Telnet Commands for the
SocketWireless Wi-Fi (MT810SWM-IP)
and the SocketEthernet IP
(MT100SEM-IP)
NOTE: The Telnet commands are also used by the SocketEthernet IP (MT100SEM-IP).
Set Commands
#TELNET – Start/Stop Telnet Session
Description: Starts and stops a Telnet session.
Note: The module must be reset to put the command into effect.
Syntax: AT#TELNET=<0,1>
Values: AT#TELNET=0 Stop Telnet session.
AT#TELNET=1 Start Telnet session; wait for remote to Telnet in.
Display: AT#TELNET? Indicates whether a Telnet session has been started.
Default: 0
Example: AT#TELNET?
0
OK
#TELNETPORT– Set Telnet Port
Description: Sets Telnet port.
Note: The module must be reset to put the command into effect.
Syntax: AT#TELNETPORT = <port number>
Values: 1 to 65535
Display: AT#TELNETPORT? or AT#VTELNET or AT#VALL Displays the port number or all Telnet
settings or all values.
Default: 23
Example: AT#TELNETPORT?
23
OK
#TELNETUSER – Set Telnet User
Description: Sets Telnet user.
Note: The module must be reset to put the command into effect.
Syntax: AT#TELNETUSER= “<64 char string>”
Display: AT# TELNETUSER? or AT#VTELNET or AT#VALL Displays the user (64 char string) or all
Telnet settings or all values.
Default: admin
Example: AT#TELNETUSER?
admin
OK