User guide

Part 3 – Commands for Wi-Fi Devices Chapter 11 – General Commands for the SocketWireless Wi-Fi (MT810SWM-IP)
Universal IP AT Commands Reference Guide (Document S000457H) 57
Chapter 11 – General Commands for the
SocketWireless Wi-Fi (MT810SWM-IP)
Set Commands
A – Manual Answer of a TCP or UDP Connection
Description: Manual answer of a TCP or UDP connection.
Syntax: ATA
Example: 1. AT#WLANENABLE=1
2. Give command ATS0=0
3. Connect a TCP connection using command AT#TCPSTART=1/2
OK
RING… <ATA is issued>
4. Ok_Info_WaitingForData
S2 – Escape Sequence
Description: Use this command to change the character for the escape sequence.
Syntax: Set Value: ATS2=<+>
Values: 'c' value, which is used as the escape sequence
Default: '+'
Example: ATS2?
+
OK
ATS2=+
OK
ATS2?
+
OK
A/ – Previous Command
Description: This command executes the previous command.
Syntax: A/
Values: No parameter values.