User guide

Part 2 – Commands for the SocketEthernet IP Chapter 9 – Auto Discovery Commands for the MT100SEM-IP
Universal IP AT Commands Reference Guide (Document S000457H) 50
Chapter 9 – Auto Discovery Commands
for the SocketEthernet IP
(MT100SEM-IP)
A Note about Auto Discovery: Auto Discovery will broadcast information; however, at this time, the information
cannot be updated using the Auto Discovery Manager.
Set Commands
#AUTODISC – Auto Discovery On/Off
Definition: This command turns Auto Discovery On or Off.
Syntax: Set Value: AT#AUTODISC=<value>
View Value: AT#AUTODISC? or AT#VAUTODISC, AT#VALL
Values: 0 OFF
1 ON
Default: 1
#AUTODISCTIMER – Auto Discovery Timer
Definition: This command sets the Auto Discovery timer.
Syntax: Set Value: AT#AUTODISCTIMER=<value>
View Value: AT#AUTODISCTIMER? or AT#VAUTODISC, AT#VALL
Values: 0 to 60 seconds
Default: 10
#AUTODISCPORT – Auto Discovery Port
Definition: This command sets the Auto Discovery port.
Syntax: Set Value: AT#AUTODISCPORT=<value>
View Value: AT#AUTODISCPORT? or AT#VAUTODISC, AT#VALL
Values: 0 to 65535
Default: 1020
#AUTODISCHOST – Set Auto Discover Host Name
Definition: This command sets the Host Name that will appear in the Auto Discovery Manager.
Syntax: Set Value: AT#AUTODISCHOST ="<value>"
View Value: AT#AUTODISCHOST? or AT#VAUTODISC or AT#VALL
Values: Alphanumeric ASCII text string up to 120 characters.
Default: MT100SEM