User guide

Part 1 – AT Commands for All Universal IP DevicesChapter 4 – FTP Commands
Universal IP AT Commands Reference Guide (Document S000457H) 37
#FTPPUTPATH – Set Path to Send Files to the FTP Server
Definition: In order for the TCP/IP stack software to send a file to the FTP server, the TCP/IP stack software
must know the path of the relevant file. For example: ftp.companyx.com/wireless/WPST or, if you
at in the root ftp.companyx.com, you can then simply type /
Syntax: Set Value: AT#FTPPUTPATH="<value>"
View Value: AT#FTPPUTPATH? or AT#VFTP, AT#VALL
Values: Alpha-numeric ASCII text string up to 120 characters.
Note: Depending on the FTP server, the value can be used for getting a file from the root
directory of the FTP server. No default.
#FTPAPPEND – Append Data to Server
Definition: This command sent by the attached host directs the TCP/IP stack to connect to the specified FTP
server and to append the data received on the serial port to the specified file on this server. Once
the operation is completed, the TCP/IP stack closes the FTP connection.
Once an IP link is established, the attached host can send a file to a FTP server at any time
(except when the TCP/IP stack software is already in a process using TCP resources).
This command is similar to a PUT operation (with an automatic connect/disconnect) issued by a
standard FTP client on a PC. The TCP/IP stack handles the global FTP put process by itself.
Syntax: AT#FTPAPPEND
Display Command
#VFTP – Display FTP Parameters
Definition: This command directs the TCP/IP stack to display all AT# parameters for the FTP client
configuration.
Syntax: AT#VFTP
Values: FTPSERV
FTPPORT
FTPUN
FTPPW
FTPGETFILENAME
FTPPUTFILENAME
FTPPUTPATH
FTPTYPE
FPTMODE