User guide

Part 1 – AT Commands for All Universal IP Devices Chapter 2 – SMTP Commands
Universal IP AT Commands Reference Guide (Document S000457H) 30
#SMTPAUTH – Authentication ON or OFF
Definition: Turns authentication ON or OFF.
Syntax: Set Value: AT#SMTPAUTH=<value>
View Value: AT#SMTPAUTH? or AT#VSMTP, AT#VALL
Values: 0 OFF
1 ON
Default: 0
Display Commands
#VSMTP – Display SMTP Parameters
Definition: Directs the TCP/IP stack to display all the AT# parameters related to the email sender
configuration.
Syntax: AT#VSMTP
Example:
Command Possible Responses
AT#VSMTP
Note: View SMTP
parameters
#DOMAIN: “a2myoper.com
#SENDERADDR: “toto@myoper.com”
#SENDERNAME: “toto”
#SMTPPORT: 25
#SMTPPW: “mysmtppw”
#SMTPSERV: “smtp.a2myoper.com”
#SMTPUN: “mysmtpun”
#SMTPAUTH: 1
OK
#VMAILi – Display Email Parameters for Respective Mail ID
Definition: This command directs the TCP/IP stack to display all the AT# parameters related to the email
combinations configuration.
Syntax: AT#VMAILi (replace i with 1, 2, or 3)
Command Possible Responses
AT#VMAIL1
Note: View predefined (nb 1) mail
header elements
#Body 1=
#REC1=
#CCREC1=
#SUBJ1=
OK