User guide

Index
Universal IP AT Commands Reference Guide (Document S000457H) 104
Index
#
#ACCEPT – Answer Incoming Call 76
#ANSWERMODE – Set Answering Mode 71
#APNPW – Access Point Name Password 79
#APNSERV – Access Point Name 79
#APNUN – Access Point User Name 79
#ATCMD – Set Default Dial Time AT Commands 73
#AUTHENT – Authentication Type 70
#AUTOCONNECT – Automatically Connect the PPP Link
78
#AUTODISC – Auto Discovery On or Off 50
#AUTODISCHOST – Set Auto Discovery Host Name 50
#AUTODISCPASSWORD – Auto Discovery Password 51
#AUTODISCPORT – Auto Discovery Port 50
#AUTODISCTIMER – Auto Discovery Timer 50
#AUTODISCUSERNAME – Auto Discovery User Name51
#AUTORESET – Reset Main Processor to Given Time 20
#BODYi – Set Pre-Defined Email Combinations 27
#CALLBACKTIMER – Automatic Call-Back Wait 71
#CALLSCREENNUM – Caller ID 71
#CCRECi – Set Additional Recipient CC 25
#CONNECTIONSTART – Start Communication 77
#CONNECTIONSTOP – Stop Communication 76
#DELFLASH – Erase Flash Memory Parameter Values20
#DHCP – DHCP On or Off 47, 53
#DIALN1 – Primary Dial-Up Number 74
#DIALN2 – Secondary Dial-Up Number 74
#DIALSELECT – Internet Connection Number 75
#DISPLAYIP – Display IP Addresses 80
#DLEMODE – Set DLE Mode 38
#DNSSERV1 – Set DNS Server IP Address 48, 54
#DNSSERV2 – Set Secondary DNS Server 48, 54
#DOMAIN – Set Domain Name of the Sender 26
#EMACSPD – Set Netmask Address 48
#ETHIFSTATUS – View Network Interface Settings 49
#FTPAPPEND – Append Data to Server 37
#FTPGET – Download Files from FTP Server 36
#FTPGETFILENAME – Set FTP Download File Name 35
#FTPGETPATH – Path to Get Files from FTP Server 36
#FTPMODE – Enter FTP Mode 34
#FTPPORT – Enter FTP Server Port 34
#FTPPUT – Upload Files to FTP Server 36
#FTPPUTFILENAME – Set FTP Upload File Name 35
#FTPPUTPATH – Path to Send Files to the FTP Server37
#FTPPW – Set FTP Password 35
#FTPSERV – Specify FTP Server Address 35
#FTPTYPE – Specify Data Type 34
#FTPUN – Set FTP User Name 35
#GETMAIL – Retrieve Host Mail 32
#GPIO – Enable/Disable/Configure External GPIO Driven
Events 83
#GPRSCID – PDP Context Identifier 80
#GPRSMODE – Switch Between GSM and GPRS 80
#GPSGETMESSAGE – Get Queued GPS Message 89
#GPSGPGGA – Enable/Disable GPGGA Message 87
#GPSGPGLL – Enable/Disable GPGLL Mes
sage 88
#GPSGPGSA – Enable/Disable GPGSA Message 88
#GPSGPGSV – Enable/Disable GPGSV Message 88
#GPSGPRMC – Enable/Disable GPRMC Message 88
#GPSGPVTG – Enable/Disable GPVTG Message 89
#GPSINTERVAL – GPS Server Transmission Interval 87
#GPSINTERVALLOC – GPS Local Transmission Interval
89
#GPSPORT – Set GPS Host Port 86
#GPSPREFIX – Set GPS Message Prefix 86
#GPSPROTO – Set GPS Host Protocol 86
#GPSPW – Set GPS Host Login Password 87
#GPSSERV – Set GPS Host Server Address 86
#GPSURAIS – Set GPS Unique Remote Asset
Identification String 87
#IPADDR – Set Static IP Address 47, 53
#IPDNSSERV – Configure the DNS Server 54
#IPDNSTABLE – Display DNS Table 56
#IPGATEWAY – Set Gateway Address 47, 53
#IPNETMASK – Set Subnet Mask 48, 54
#IPQUERY – Give a Domain Name 55
#IPRELEASE – Release a DHCP Address Assigned by
the Server 55
#IPRENEW – Renew the DHCP Information from the
Server 55
#IPRESOLV – To Observe Whether There Is a
Connection with DNS or Not 55
#ISPPW – ISP Password 75
#ISPUN – ISP User Name 75
#KEEPALIVEDELAY – Keep-Alive Delay 72
#KEEPALIVEMODE – Keep-Alive Mode 72
#KEEPALIVEPORT – Keep-Alive Port Number 72
#KEEPALIVESERV – Keep-Alive Server Address 72
#LEGACYMODE – Legacy Mode Enable/Disable 20
#LTCPSTART – Open Listening Mode 39
#LTCPSTOP – Close TCP Listening Mode 40
#LUDPSTART – Initiate UDP Session in Listen Mode 42
#LUDPSTOP – Close UDP Listening Mode 43
#OTCP – Open a TCP Connection 40
#OUDP – Initiate UDP Session in Active Mode 43
#OUTPORT – UDP/TCP Local Port Number 73
#PERSISTENTSOCKET – Persistent Socket 21
#PHYTIMEOUT – Inactivity Timer 74
#PING – Start PING Request 44
#PINGDELAY – PING Delay Time 44
#PINGNUM – Number of PING Requests 44
#PINGREMOTE – IP Address of PING Request 44
#POP3HEADERMODE – POP3 Header 31
#POP3PORT – Set POP3 Server Port 31
#POP3PW – Set POP3 Password 31
#POP3SERV – Set POP3 Server Address 31
#POP3UN – Set POP3 User Name 32
#PPPMODE – TCP/IP Behavior 78
#PPPMYIP – IP Address When Using PPP 78
#PPPPEERIP – IP Address for Remote PPP 78
#PPPSERVPW – Remote PPP Client Password 79
#PPPSERVUN – User Name for Remote PPP Client 79
#PUTMAIL – Send Mail to Recipient in Interactive Mode29
#RECiADD – Set Email Address 26
#REDIALCOUNT – Connection Attempts Allowed 73
#REDIALDELAY – Call Retry Delay 73
#RESET – Reset Main Processor or Internal Modem 21
#RINGCOUNT
– Set Number of Rings 74