Specifications

HYLAFAX-CONFIG(5F) HYLAFAX-CONFIG(5F)
terminated.
FAXNumber
The phone number associated with the facsimile modem. This string is used to generate the Trans-
mitter Subscriber Identification (TSI)and Caller Subscriber Identification (CSI)information passed
to remote machines—unless the LocalIdentifier parameter is explicitly set. The FAXNumber is
also used to name the session log file where information for incoming phone calls is recorded; see
hylafax-log(5F). If this phone number is not a fully qualified number the values of AreaCode and
CountryCode are used to generate the transmitted CSI and TSI.
Include²
Include the specified file and parse it as a config file
InternationalPrefix²
The string to use to place an international phone call. In the United States, this is ‘‘011’’. This
string is passed to the dial string rules.
JobControlCmd¹
The command to invoke towhich provides Job Control information for a job.See JobControl(8C).
JobReqBusy
The delay in seconds to wait before retrying a job whose dialing attempt failed with a ‘‘BUSY’’
status result.
JobReqDataConn
The delay in seconds to wait before retrying a facsimile job whose dialing attempt failed because a
data modem answered the phone.
JobReqNoAnswer
The delay in seconds to wait before retrying a job whose dialing attempt failed with a ‘‘NO
ANSWER’’ status result.
JobReqNoCarrier
The delay in seconds to wait before retrying a job whose dialing attempt failed with a ‘‘NO CAR-
RIER’’ status result.
JobReqNoFCon
The delay in seconds to wait before retrying a facsimile job whose dialing attempt failed because
the initial facsimile protocol handshakefailed (i.e. no ‘‘+FCON:’’ result was receivedfrom a Class
2/2.0 modem).
JobReqOther²
The delay in seconds to wait before retrying a job that failed for a reason not already covered by
one of the JobReq* parameters.
JobReqProto
The delay in seconds to wait before retrying a facsimile job that failed because of a fax protocol
error.
JobRetryBusy
The number of times to redial a phone number after receiving a ‘‘BUSY’’ result code when the
number has not been successfully dialed before.
JobRetryDataConn
The number of times to redial a phone number after the dialing attempt failed because a data
modem answered the phone when the number has not been successfully dialed before.
JobRetryNoAnswer
The number of times to redial a phone number after the dialing attempt failed because of NO
ANSWER when the number has not been successfully dialed before.
$Date$ 12