User guide

MT5634ZPX Quick Start Guide
8
12. Click Finish in the Completing the Add Hardware Wizard window and
Windows wants to restart your computer in order for the changes to take
effect. Click Yes.
13. After the system reboots, verify that your com port is available and your IRQ is
correct by selecting the Control Panel I System and clicking on the Hardware
tab in the System Properties screen.
14. Click on the Device Manager button. Click on the Ports (COM & LPT) to
display the Communications Ports. If either a yellow Exclamation point or Red
Question mark appears, a conflict with some of the resources or that the
device is disabled in the system. If no yellow Exclamation point or Red
Question mark, no conflicts are present.
Step 5 - Run Add Modem Wizard
1. Place the MT5634ZPX-V92 CD in the CDROM drive and allow time for the CD
to spin up. The MT5634ZPX-V92 AutoRun screen will appear.
2. Click on Start I Control Panel I Phone and Modem Options.
3. In the Phone and Modem Options screen with the Dialing Rules tab active,
click on the Modems tab.
4. Click on the Add button.
5. In the Install New Modem screen, click on Don’t detect my modem; I will
select it from a list. Click Next.
6. In the next Install New Modem screen, click on the Have Disk button.
7. Browse to the location of the CDROM drive, usually CD Drive(D:). The Locate
File screen appears, click on the Look in: down arrow and choose the CDROM
drive. Click on zpxisa.inf file.
8. In the Models window of the Install New Modem screen, click on the
MT5634ZPX-V92 option and click Next.
9. The Select the port(s) you want to install the modem on screen appears.
Highlight the COM port On which ports do you want to install it? This is the
COM port that you choose in step 8 in Determine System Resources. Click
Next.
10. Windows will display the logo compatibility test screen, click Continue
Anyway button.
11. The Modem installation is finished screen appears, click Finish.
Step 6 - Query Modem
1. To be sure the system can access the modem, highlight the MT5634ZPX-V92
in the Modem window of the Phone and Modem Options screen. Click the
Properties button.
2. The MT5634ZPX-V92 Properties screen is displayed, click on the Diagnostics
button.
3. In the Modem Information area, click on Query Modem button. The system
will pause for a few seconds while trying to access the modem. The modem
will respond to the AT commands sent by the system.