User guide

MT5634ZPX Quick Start Guide

The MultiModem only uses IRQs 3,4,and 5 so you need to check in the

above screen to see if any of these IRQs are available. The MultiModem is

defaulted to IRQ 5.

5. Record the available IRQ that you are going to use _____.

6. Now, click on I/O to display the available I/O addresses.

7. The MultiModem uses the following I/O addresses:

COM1: 3F8-3FF

COM2: 2F8-2FF

COM3: 3E8-3EF

COM4: 2E8-2EF

and is defaulted to COM 4.

8. Record the available I/O address that you are going to use _______.