User guide

MT5634ZPX Quick Start Guide

The Global Wizard Utility

The Global Wizard configuration utility is recommended for computers running

Windows 98 or newer.

1. Insert the MultiModem CD into the CD-ROM drive. The Autorun menu should

appear.

2. Click Initial Setup and Country Selection.

3. In the Global Wizard dialog box, select either Run from CD or Install on

your PC. Choose the former to configure your modem without installing the

Global Wizard on your computer. Choose the latter to install the Global Wizard

on you computer and Start menu.

4. Click Next. The Global Wizard searches for your modem and identifies it.

5. Click Next.

6. Select the country in which the modem will be used, and then click Next.

7. Review your choice of country. If it is correct, click Next to configure the

modem.

8. When Global Wizard announces that the parameters have been set, click

Finish to exit.

AT Commands

Non-Windows users can configure the modem using AT commands. You must

enter these commands in your communication program’s terminal window.

There is a separate document of AT Commands provided for reference on the

MultiModem system CD.

1. Run your favorite communication program, and open the program’s terminal

window.

2. To configure the modem for a specific country, type AT%T19,0,nn, where nn

is the country code in hexadecimal notation, and then press Enter.

3. To verify the change, type ATI9, and then press Enter. The country code is

displayed in decimal format.

Example of country, command and result codes

Country AT command

(hexadecimal)

Result code

(decimal)

Euro/NAM AT%T19,0,34 (default) 52

Japan AT%T19,0,10 16

A complete list of country codes can be found on the Multi-Tech Web site at:

http://www.multitech.com/GlobalModem/config.