User`s guide

Installing HotFax MessageCenter
If installing a new modem, you may need your modem
manufacturer's modem drivers to properly install it. After
selecting your modem, the modem detection dialog displays.
Next, HotFax MessageCenter automatically determines your
modem’s capabilities, such as whether it supports voice or
fax, or both.
• Voice Modem Setup: (optional dialog) If a voice-modem is
detected, HotFax MessageCenter displays the Voice Modem
Setup option. Choose the number of mailboxes and the default
voice type. On the next dialog you can choose your record
from and play to options in addition to message quality,
speaker volume, and other functions associated only with a
voice modem. You can also test the microphone and playback
levels.
• User Interface: Choose the type of user interface you would
like to work with when using HotFax MessageCenter:
− Large graphic (telephone)
− Small graphic
− Classic Windows graphic
You can change this at any time. See Selecting Your Command
Console Type for details.
This dialog also lets you determine whether you want to run
HotFax Tray at Windows startup. See Using the Tray program in
the Starting HotFax MessageCenter section for details.
You can also enable sending faxes to an e-mail address. You must
provide an SMTP server name to be able to send faxes to an e-
mail address. You may also need to provide login information if
your SMTP server requires authentication. You can get this
information from your Internet Service Provider (ISP) or LAN
administrator. Press the Setup button to configure your
e-mail/Internet access.
• Thank You: Encourages you to register your copy of HotFax
MessageCenter. The registration dialog will appear later.
Note: If you do not wish to register now, you may register later by
Opening the Help menu from the command console and selecting
the Register option.
8 HotFax MessageCenter User's Guide