Owner`s manual

MultiMobile 83
Chapter 6—Appendix
DOSFLASH
1. Copy DOSFLASH.ZIP and the downloaded .HEX file to a temporary
directory.
2. Unzip DOSFLASH.ZIP.
3. To upgrade the modem, run DOSFLASH using the command dflash10
x y, where x is the number of the port the modem is connected to and y
is the IRQ number for the port. The IRQ number is optional if you are
using the standard IRQ number for the port. For example, if your
modem is connected to COM2 and COM2 has IRQ 3 assigned to it
(which is standard for that port), type either dflash10 2 or dflash10 2
3.
FLASHWIN
1. Copy FLASHWIN.ZIP and the downloaded .HEX file to a temporary
directory.
2. Unzip FLASHWIN.ZIP.
3. Run FLASHWIN by double-clicking on its icon or file name.
4. Select the COM port your modem is on and the speed at which you
want to program.
5. Enter the name and path of the *.HEX file you want to load into the
modem.
6. When you have verified your selections, click Perform Flash to load
the firmware into the modem.
7. When Loading Status reaches 100%, the modem has been upgraded
and you can close FLASHWIN.
FLASHNT
1. Copy FLASHNT.ZIP and the downloaded .HEX file to a temporary
directory.
2. Unzip FLASHNT.ZIP.
3. Run FLASHNT.EXE by double-clicking its icon or file name.
4. Select the COM port your modem is on and the speed that you want to
program at. The default is 57,600 bps.
5. Verify that the selected firmware file (*.HEX) is the correct one. If
necessary, use the Browse button to find the correct file.