Owner`s manual

MultiMobile 69
Chapter 6—Appendix
COMMAND OPTIONS FUNCTION & DESCRIPTION
ATH5 View ISDN TA status
Line Lost: ISDN phone line not properly
attached
SPID Fail: Both SPID numbers are incorrect
1 SPID Ready: One of SPIDs is incorrect
2 SPID Ready: ISDN TA OK
ATI3 View driver version
ATO Return to connection on-line mode
AT!C0=n ISDN D-channel protocol & switches selection
n=00 AT&T 5ESS Custom
n=01 Northern Telecom DMS-100
n=02 ETSI Europe ISDN
n=05 U.S. National ISDN-1 (NI-1), factory default
AT!C6=n Set Service Profile ID 0 (SPID 0), where n is
SPID number, up to 20 characters.
Example: ISDN phone number: 5551000
SPID 0: 0555100001
AT!C2=n Set Service Profile ID 1 (SPID 1), where n is
xSPID number, up to 20 characters.
Example: ISDN phone number: 5553000
SPID 1: 0555300001
AT!N0=n Set ISDN Directory Number 0 (DN 0), where n
is ISDN phone number.
Example: DN 0: 5551000 => n=5551000
AT!N1=n Set ISDN Directory Number 1 (DN 1), where n
is ISDN phone number.
Example:DN 1: 5553000 => n=5553000
AT!Q=nn=0 Set B-channel to 64K
n=4 Set B-channel to 56K
AT!V=nn=0 Incoming voice-grade calls answered by ISDN
phone
n=1 Incoming voice-grade calls answered by
modem (Modem over ISDN)
n=2 Enable audio speech