Owner`s manual
56 MultiMobile
Chapter 4—Troubleshooting
10 Network card
11 Network card (not a possible choice)
12 Network card or bus mouse (not a possible choice)
13 Computers co-processor (not a possible choice)
14 Hard drive controller or network card (not a possible choice)
15 Second hard drive controller or network card (not a possible
choice)
Windows 95 COM Port and IRQ Conflicts
1. With the right mouse button, in Windows 95 click My Computer.
2. Select Properties, click the Device Manager tab, and double-click
Ports.
3. Then double-click the Communications Port your TA is connected to.
4. In the ports Properties sheet, click the Resources tab to view the
ports Input/Output range and Interrupt Request. If another device is
using the same address range or IRQ, it appears in the Conflicting
Device list.
5. Disable Use Automatic Settings (remove the check from check box) to
change the ports settings so they do not conflict with the other
device. Or, select the port the conflicting device is on and change it.
If you need to open your computer to change switches or jumpers on
the conflicting device, refer to the devices documentation.