Owner`s manual

48 MultiMobile
Chapter 3—Application Program Interfaces (APIs)
ISDN Phone
1. Click Start, Programs, RVS-COM Lite, and then CommCenter.
2. Open the Ports tab. Make sure the ISDN port box is checked. Click
Properties.
3. Open the Port tab. Make sure your ISDN phone/MSN number for
outgoing calls is correct.
4. Open the Windows Port tab. Make sure the COM port is assigned and
enabled. For example, COM6.
5. Click Autoanswer. Make sure Answer calls automatically and Voice
check boxes are checked. Enter the phone/MSN number for voice
services
6. Click Properties; then open the Answer call tab. Enter the number of
rings before answering. Click OK.
7. Open the ISDN tab. Select the appropriate ISDN voice coding scheme
for your area. A-law is commonly used in European countries. Mu-law
is for US and Canada.
8. Make sure all the other settings in RVS CommCenter are correct.
9. Click Apply; then OK.
If any setting changed, reboot Windows 95.
10. Click Start, Programs, RVS-COM Lite, and then Telephone.
11. Click Answerphone function bar to OFF (ON is for Answering machine
services).
12. Plug the microphone and speakerphone to the audio interface(s) on
your laptop.
13. Use phone dialer in RVS Phone to dial out.
When calls come in, the RVS Phone automatically opens. Click Accept
to pick up calls. Click Hang Up to disconnect line when finished.