Owner`s manual

46 MultiMobile
Chapter 3—Application Program Interfaces (APIs)
5. To add file(s) with your message, click Add File to open your system
folder to select the file. Click OK. The file appears in the File to send
list. Click Next.
6. If you want to preview the fax document, click Show fax, then click
Finish to end the fax sending preparation. RVS then sends the fax for
you automatically.
Voice Applications
With the RVS-COM Lite ISDN software package and laptop equipped with
full-duplex sound card, voice applications are possible. These include:
 Digital answering machine
 ISDN phone (acts like a telephone where you communicate over ISDN
line)
To use voice applications fully, especially the ISDN phone service, you
need a full-duplex audio device (sound card). Full-duplex means your
audio device can handle incoming and outgoing sound signals
simultaneously (i.e., you can listen and talk at the same time). If you do
not have full-duplex, you hear the caller only. However, this still allows
you to run the answering machine function.
Digital Answering Machine
1. Click Start, Programs, RVS-COM Lite, and then CommCenter.
2. In the Ports tab, make sure the ISDN port check box is checked. Click
Properties.
3. Open the Port tab. Make sure your ISDN phone/MSN number for
outgoing calls is correct.
4. Open the Windows Port tab. Make sure the COM port is assigned and
enabled. For example, COM6.
5. Open the Autoanswer tab. Make sure the Answer calls automatically
and Voice boxes are checked. Enter the phone/MSN number for voice
services.
6. Click Properties; then click the Answer call tab. Enter the value for the
number of rings before answering. Click OK twice.