Owner`s manual

MultiMobile 45
Chapter 3—Application Program Interfaces (APIs)
G3 Faxing Applications
To use RVS-COM to send/receive G3 faxes, the following components
need to be installed:
 Microsoft Exchange (see MS Exchange installation)
 RVS FAX and RVS Voice mail (see RVS-COM Lite installation)
Receiving
1. Click Start, Programs, RVS-COM Lite, and then CommCenter.
2. In the Ports tab, make sure the ISDN port check box is activated. Click
Properties.
3. Open the Autoanswer tab. Make sure Answer calls automatically and
Fax check boxes are checked. Enter the phone/MSN number for fax
services.
4. Click Properties and click the Answer call tab. Enter the number of
rings for answering.
5. Open the Fax ID tab and enter your local fax ID. Click OK.
6. Open the Windows Port tab. Make sure the COM port is assigned and
enabled. For example, COM6.
7. Open the Port tab. Make sure your ISDN phone/MSN number for
outgoing calls is correct.
8. Make sure all the other settings in RVS CommCenter are correct. Click
Apply; then OK. If any setting changed, reboot Windows 95. Wait for
incoming fax calls.
Sending
1. Click Start, Programs, RVS-COM Lite, and then Create new fax. The
Microsoft Mail dialog box opens. Click OK.
2. Enter the name and fax number of the remote party that wants to
connect. Click Next.
3. Enter the subject and text of the fax message you want to send. Or, skip
by clicking Next.
4. Attach your fax cover page or skip by clicking Next.