Owner`s manual

MultiMobile 43
Chapter 3—Application Program Interfaces (APIs)
Act as a Calling Party (make outgoing calls)
1. Click Start, Programs, RVS-COM Lite, and then CommCenter. Make
sure the following settings are correct:
Your ISDN phone number
The COM port assignment
MSN/EAZ numbers
If you change any settings, remember to reboot your system.
2. Click My Computer, Control Panel, and then Modem. Select RVS
ISDN X.75 transparent. Click Properties. Make sure the COM port is
assigned correctly and no conflict exists. For example, RVS Port
(COM6). Click OK; then close the window.
3. Open Windows 95 Hypertrm. Enter a name for the new connections.
For example, RVS_X75. Click OK. Enter the ISDN phone number that
you want to connect to. Select RVS ISDN X.75 transparent in the
Connect using box. Click OK. Click Dial to dial.
After you establish the ISDN link, you can use data transmission
protocols such as Z-modem or X-modem for data transfer.
EuroFile Transfer Applications
Act as a Called Party (Host Mode)
1. Click Start, Programs, RVS-COM Lite, and then CommCenter.
2. Click the Port tab. Make sure the ISDN port check box is checked.
Click Properties. In the Port tab, make sure your ISDN phone/MSN
number for outgoing calls is correct.
3. Click the Windows Port tab. Make sure COM port is assigned and
enabled.
4. Click the Autoanswer tab. Make sure Answer calls automatically and
Eurofile Transfer check boxes are checked. Also, enter the phone/
MSN number for Eurofile Transfer.
5. Click Properties; then click the Answer call tab. Enter the number of
rings before answering. Click OK.
6. Make sure all other settings in RVS CommCenter are correct. Click
OK.