Owner`s manual

42 MultiMobile
Chapter 3—Application Program Interfaces (APIs)
11. To make connections with Multi-Link PPP, click Settings. Select Use
additional devices. Then click Add. Use the arrow to scroll down the
Device name list and select RVS ISDN Internet PPP #2. Click OK
twice.
12. Select the Server Types tab. Use arrow to scroll down Type of Dial-Up
Server list and select PPP: Win95, Windows NT 3.5, Internet.
13. Click the appropriate Advanced options.
14. Under Allowed network protocols, select at least TCP/IP protocol for
your Internet application.
15. Click TCP/IP Settings and specify other TCP/IP parameters such as IP
address and DNS address, if necessary. Click OK when finished.
Now you are ready to communicate with your ISP via Multi-Link PPP
protocol.
Making X.75 Connections
Act as a Called Party (for incoming calls)
1. Click Start, Programs, RVS-COM Lite, and then CommCenter. Make
sure the following settings are correct:
Your ISDN phone number
COM port assignment
MSN/EAZ numbers
If you change any settings, remember to reboot your system.
2. Click My Computer, Control Panel, and then Modem. Select RVS
ISDN X.75 transparent. Click Properties. Make sure the COM port is
assigned correctly and no conflict exists. For example, RVS Port
(COM6). Click OK; then close the window.
3. Run Windows 95 Hypertrm. Set ATS0=1 <Enter> by using the AT
command to make the ISDN TA PC Card to automatically answer the
incoming X.75 calls. Then wait for the incoming calls.