Owner`s manual

MultiMobile 41
Chapter 3—Application Program Interfaces (APIs)
5. Under Advanced Options click TCP/IP (at least) in Network Protocols
for your Internet application
6. Click TCP/IP Settings and specify other TCP/IP parameters, such as IP
address and DNS address, if necessary.
Now you are ready to connect to your ISP via PPP protocol.
Using Multi-Link PPP to Connect to ISPs
1. Click Start, Programs, RVS-COM Lite, and then CommCenter. If only
one COM port, (for example, ISDN) is listed in CommCenter controls
the following ports: text box, add another ISDN port.
2. To add another ISDN port, click Add. The Add New Port dialog box
appears. Select An ISDN channel on your local PC; then click Next.
3. Enter a new port name (for example, ISDN2). Click Next.
Select Let other programs use this as a COM port. Click Next. Select a
name for this port where it can be accessed in Windows. Click Next;
then click Finish.
4. Click My computer, Control Panel, and then Modem. Click Add, Other;
then click Next.
5. Select Dont check my modem; I will select it from a list. Click Next.
6 Select RVS Datentechnik from the Manufacturers list and RVS ISDN
Internet PPP from the Models list. Click Next.
7. Select the RVS COM port just added.
RVS ISDN Internet PPP #2 should appear in the modem list.
8. In My Computer dialog box, select the Dial-Up Networking folder.
Click Make new Connection and enter a new connection name. For
example, RVS_2.
Select the modem RVS ISDN Internet PPP. Click Next.
9. Enter the phone number for the computer you want to dial. Click Next.
Click Finish to return to the Dial-Up Networking dialog box.
10. With the right mouse button, click the icon RVS_2. Click Properties.