Owner`s manual

40 MultiMobile
Chapter 3—Application Program Interfaces (APIs)
File Transfer Host Configuration (Host Mode in RVS CommCenter)
1. The File Transfer Host dialog box appears. Click Next.
2. In the next dialog box , enter the ID and password for your file transfer
host, which allow remote callers to log into specified folders and
access data.
3. Specify the file folder path that requires ID and password for caller
access.
4. Specify the file folder path that allows caller access without ID and
password. Click Finish.
The Installation Wizard is finished now. Click OK to start the CommCenter
and activate the installed services. Reboot your laptop. RVS-COM is
completely installed now. To change RVS-COM settings, open RVS
CommCenter.
Applications
Using PPP Protocol to Connect to ISPs
Click My computer, Control Panel, and then Modems. If RVS ISDN
Internet PPP appears in the list under the General tab, RVS-COM
installed successfully. Otherwise, check the RVS-COM installation. Or, call
the RVS-COM support center for help.
Click Control Panel, Add/Remove Programs, Windows Setup tab,
Communications, and then Details to ensure Dial-Up Networking
appears in the Components list. If it is not installed (box next to the folder
is not checked), follow these instructions:
1. In the Dial-Up Networking folder, click Make New Connection. Enter a
name for the new connection icon. For example: RVS_1. Select RVS
ISDN Internet PPP.
2. With the right mouse button, click the new connection icon.
3. In the General menu, enter the phone number you want to dial. Select
RVS ISDN Internet PPP from the Connect Using box.
4. In the Server Type menu, select PPP: Win95, Windows NT 3.5,
Internet from the Type of Dial-Up Server box.