Owner`s manual

MultiMobile 37
Chapter 3—Application Program Interfaces (APIs)
NOTE: The ISDN modem is not an emulation of an analog modem
(i.e., it does not transmit tones). Consequently, you cannot use it to
set up a connection to nonISDN mailboxes, nor can you test it with
tools designed for analog modems.
 TelephonyTurns your laptop into a complete ISDN telephone (full
duplex sound card is required in your laptop).
Preparation
To run RVS-COM on your computer, you must have Windows 95 or OSR2
installed with Microsoft Exchange and CAPI driver.
Microsoft Exchange
Refer to the Windows 95 users manual for additional details about MS
Exchange installation and configuration.
1. Click Control Panel, Add/Remove Program, and then Windows Setup.
2. Click the Microsoft Exchange (or Windows Messaging in OSR2) check
box. Click OK.
3. Select Manual method to set the service.
4. Add the service Personal Notes (Address Book in OSR2) and
Personal Directory (Folders in OSR2).
5. When adding the Personal Directory, provide a path for a pst file. For
example, if temp subdirectory exists, name the path c:\temp\new.pst.
RVS-COM Lite Installation
To install RVS-COM Lite on your PC:
1. Click Start, Settings, and then Control Panel. Double-click Add/
Remove Programs. Click Install.
2. Insert the RVS-COM CD-ROM into your CD drive. Then click Next.
3. D:\SETUP.EXE appears in the command line. Click Finish.
4. Enter the serial number (KEY), which is located on a sticker on the back
of the CD-ROM. Click SETUP and follow on-screen instructions until
setup is completed; then click Finish.