Owner`s manual

MultiMobile 15
Chapter 2—Hardware/Driver Installation
Windows 95/98 Installation—NDIS
1. Click Settings, Control Panel, and then double-click the Add New
Hardware icon. The Add New Hardware Wizard dialog box appears.
Click Next.
2. When the next Add New Hardware Wizard dialog box appears, make
sure No is selected; then click Next.
3. In the next Add New Hardware Wizard dialog box that appears, scroll
down and select Network adapters. Then click Next.
4. The Select Device dialog box appears. Scroll down the list in the
Manufacturers text box and select Multi-Tech. MultiMobile
MT56128ZLX then appears in the Models text box. Click OK.
5. When the Add New Hardware dialog box appears again, click Finish.
6. The ISDN Configuration dialog box appears. Click Next.
7. The ISDN Configuration dialog box appears. Set the switch type and
click Next.
8. The ISDN Configuration dialog box appears. Type the directory
numbers and SPIDs numbers, if necessary, and click Next. Then click
Finish. The NDIS interface now is installed successfully.
Note: The switch type and phone number must be the same as Multi-
Techs configuration utility setting. If they are different, the ISDN
configuration setting overwrites Multi-Techs configuration setting.
Note: If you enter Multi-Techs Configuration utility to change the
switch type and phone number, the new settings overwrite the ISDN
configuration utility.
9. To complete setup, reboot your computer.