System information

Red Book for AIX Rel. 7.0 and 8.0
90 © 2006 Intuit Inc. All rights reserved.
Font Print Mode Utility
General Control Operator Panel Functions Full Operation
General Control Reset Inhibit No
General Control Print Suppress Effective Yes
General Control CPU Compensation Standard
Vertical Control Line Spacing 6 LPI
Vertical Control Form Tear-Off Off
Vertical Control Skip Over Perforation No
Vertical Control Auto LF No
Vertical Control Auto CR No
Vertical Control Auto Feed XT Invalid
Vertical Control Page Length 11"
Vertical Control Cut Sheet Page Length 11"
Symbol Sets Character Set Set I
Symbol Sets Language Set American
Symbol Sets Zero Character Slashed
HP LaserJet 5Si Mopier
The following information regarding the HP LaserJet 5Si Mopier was obtained from the Hewlett
Packard web site (www.hp.com).
Using the Control Panel
The HP LaserJet 5Si Mopier control panel consists of a liquid crystal control panel display and a
group of control panel keys. The following figure illustrates the control panel keys.
Control Panel Keys
The control panel arranges the various Mopier options into a simple menu structure, detailed in
the following sections. Each menu contains several items.
On Line
Switches the state of communication between computer and Mopier ON (on line) or
OFF (off line). Switching from online to off line stops printing as soon as possible.
Menus
Provides a menu system for obtaining status information or for changing the Mopier
configuration.
Items
Cycles through the items on the currently selected menu. Menu items vary
depending on the options installed and configuration of other menu choices.
+ Steps through the item choices on the currently selected menu.