System information

Rel. 7.0 and 8.0 Red Book for AIX

Installing the Solar Eclipse Client Software

Intuit Eclipse ships the Solar Eclipse Client installation program on a CD-ROM. The installation

program works for Windows 95, Windows 98, 2000, XP or Windows NT computers.

To install the Solar Eclipse client software:

1. Close all other programs.

2. Insert the install disk into the CD-ROM drive or download the executable from the

Eclipse Support web site.

3. Double-click the Solar Eclipse icon and follow the on-screen instructions.

4. Complete the Server Information window, as follows:

Field Description

Terminal ID

The ID of the terminal on which you are installing Solar Eclipse.

Note: The system uses the terminal ID in printer and OE setup, just as it

does in Eterm.

Server Name

Name of the Eclipse server. This can be an IP address or network name.

Note: This is the same information you would enter in the Host prompt on

the Eterm Communications screen.

Server Port

The port the terminal uses to connect to the Eclipse host system.

Note: You can find the port number in the entry on the Phantom Status

screen for the SOCKET.PH.SERVER program. It will nearly always be

22222.

Class Path

The network path to where the Solar classes reside. The standard class path

is \\eclipseservername\javalib, where eclipseservername is the network

name or IP address of the Eclipse server.

Note: The release engineering team puts the classes on your system. Your

installer can tell you where your classes reside.

5. Complete the on-screen instructions for the remaining windows.

Note: Accept the defaults, unless instructed otherwise by your company's IT

department.