System information

Rel. 7.0 and 8.0 Red Book for AIX

To power on your system:

1. If the console screen is black or shows the screen saver, press Enter to display the Main

Menu, as shown below:

MAIN MENU

1. Service Processor Setup Menu

2. System Power Control Menu

3. System Information Menu

4. Language Selection Menu

5. Call-In / Call-out Setup Menu

6. Set System Name

99. Exit from Menus

2. At the > prompt, type 2 and press Enter to display the System Power Control Menu, as

shown below:

System Power Control Menu

1. Enable.Disable Unattended Start Mode: Currently Enabled

2. Ring Indicate Power-On Menu

3. Reboot/Restart Policy Setup Menu

4. Power-On System

5. Power-Off System

98. Return to Previous Menu

99. Exit From Menus

3. At the > prompt, type 4 and press Enter to power on the system.

The system displays the following message:

WARNING: POWERING SYSTEM WILL EXIT MENUS!

Type Y to continue, or any other key to abort.

4. Type Y.

The system displays the following message:

System Powering On