System information

Rel. 7.0 and 8.0 Red Book for AIX
© 2006 Intuit Inc. All rights reserved. 113
To configure TCP/IP parameters on HP LaserJet 4, 4 Plus, 4V, 4Si, 5 Series, and HP
Color LaserJet printers:
1. Press Menu repeatedly until one of the following messages displays on the control panel:
HP LaserJet Printer Type Control Panel Message
HP LaserJet 4 and 4M printers AUX IO Menu
HP LaserJet 4 Plus, 4M Plus, 4V, 4MV, 5/5N/5M and
Color LaserJet printers
MIO Menu
HP LaserJet 4Si/4Si MX MIO Menu 1 or MIO Menu 2
2. Press Item, CFG NETWORK=NO* will appear.
3. Press the + key once, CFG NETWORK=YES* will appear.
4. Press Enter.
5. Press Item until CFG TCP/IP=NO* appears.
6. Press the + key. CFG TCP/IP=YES* will appear.
7. Press Enter.
8. Press Item until BOOTP=YES* appears.
9. Press the + key. BOOTP = NO will appear.
10. Press Enter.
11. Press Item. IP BYTE 1 = * appears (where * is some value).
12. Press the + key until the value of the first byte of the IP address appears on the control
panel display. By pressing Shift and the + key, the value will decrease.
13. Press Enter.
14. Press Item to continue. Repeat steps 11 - 13 to configure the remaining bytes of the IP
address.
15. Repeat steps 11 - 13 to configure the subnet mask bytes (SM BYTE 1=), syslog server IP
address (LG BYTE 1=), default gateway (GW BYTE 1=), and timeout (TIMEOUT=).
16. Press the Online button.
17. Print a self-test page to verify the IP settings.