System information

Rel. 7.0 and 8.0 Red Book for AIX
© 2006 Intuit Inc. All rights reserved. 105
8. At the system prompt (#), enter the following command to verify that the driver was
written properly.
cat lp#.dvr
The system should display what you just typed in step 5 above.
If you do not see lp -dlp# (with no extra spaces or lines), enter the following command:
rm lp#.dvr
and then re-create the driver.
9. Enter the following command to write the driver's permissions:
chmod 777 lp#.dvr
10. Enter the following command to confirm the permissions are –rwxrwxrwx.
ls -l lp#.dvr
Refer to the appropriate instructions for configuring your print server:
Configuring an Extended Systems (ESI) Device
Configuring an HP JetDirect Device