User guide

MT5634ZBA-Series Quick Start Guide
Multi-Tech Systems, Inc. 5
Connect the Two-Wire Lease Line (Leased-Line Only)
For leased line information, see the User Guide, available on your
MultiModem Product CD.
Connect the Modem to the Phone (Optional)
If you want to connect a phone to the same line as the modem, plug
the phone cable into the modem PHONE jack.
Connect the Microphone (Voice Option Only)
To connect a microphone, see the User Guide, available on your
MultiModem Product CD.
Connect the Speaker(s) (Voice Option Only)
For speakerphone or voice mail applications, use a 1/8-inch (3.5mm)
plug male-to-male stereo patch cord to connect the SPKR jack on the
side of the modem to the LINE IN jack on your sound card. If your sound
card does not have a LINE IN jack, use its MIC jack. The stereo male-to-
male patch cord can be purchased at a local PC retail store. If you do
not have a sound card, you can plug an amplified speaker directly into
the SPKR jack using a 1/8-inch (3.5mm) sterio plug.
Connect the Modem to the AC Power Outlet
The power switch is located on the right side of the modem. Make sure it
is set to OFF.
Plug the universal power supply into the PWR jack on the modem. Plug
the other end of the country-specific power supply cord into the
universal power supply and the other end into the power outlet or power
strip.
Caution: Use only the power supply supplied with the modem. Use of
any other power supply voids the warranty and can damage the
modem.
Power-on Test
When you apply power, the modem performs a diagnostic self-test. The
56 indicator should light. If this does not happen, check that the power
switch is on, the power supply is solidly connected, and the AC outlet is
live.