User guide

ManualsBrandsMultitech ManualsComputer equipmentMT5634IND

Data/Fax Industrial Temperature Modem

MT5634IND

Quick Start Guide

Summary of content (8 pages)

PAGE 1
Data/Fax Industrial Temperature Modem MT5634IND Quick Start Guide
PAGE 2
Copyright and Technical Support Quick Start Guide Data/Fax Industrial Temperature Modem MT5634IND 82010381L Rev. B Copyright This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. All rights reserved. Copyright © 2007 Multi-Tech Systems, Inc. Multi-Tech Systems, Inc.
PAGE 3
Multi-Tech Systems, Inc. MT5634IND Quick Start Guide Introduction This guide shows you how to set up your Multi-Tech MultiModem MT5634IND. See the User Guide on the MT5634IND CD for more information including product specifications, configuration, troubleshooting, and more. AT commands for the MT5634IND modem are published in a separate Reference Guide included on the MT5634IND CD and posted on the Multi-Tech Web site.
PAGE 4
Multi-Tech Systems, Inc. MT5634IND Quick Start Guide Step 1 – Desktop Placement or PanelMounting The MT5634IND is design to be used on the desktop or to be panelmounted. For panel-mounting, follow these directions for attaching the mounting bracket: 1. Typically, the modem is mounted against a flat surface with two mounting screws. Drill the mounting holes at the desired location. The mounting holes must separated by 4 -15/16 inches center-tocenter.
PAGE 5
Multi-Tech Systems, Inc. MT5634IND Quick Start Guide Step 2 – Connect the Modem to Your System For AC Power Turn off your computer. Place the modem in a convenient location, and then connect it to your computer’s serial port, the phone line, and AC power. For DC Power For DC power, use the fused cable in place of the Universal Power Supply and the AC Power Cord. It uses a 313000 Series fuse (length: 1.25” or 31.75mm; diameter: 0.25” or 6.35mm).
PAGE 6
Multi-Tech Systems, Inc. MT5634IND Quick Start Guide Steps for Connecting Your Modem to Your System RS-232 Connection Plug one end of the serial cable into the RS-232 connector on the modem, and plug the other end into a serial port connector on your computer, such as COM1 or COM2. Phone Line Connection Plug one end of the phone cable into the MT5634IND LINE jack and the other end into a phone line wall jack.
PAGE 7
Multi-Tech Systems, Inc. MT5634IND Quick Start Guide Step 4 – Configure the Modem for Your Country or Region Different countries have different requirements for how modems must function. Therefore, before you use your modem, you must configure it to match the defaults of the country/region in which you are using it. You must also do this if you move the modem to another country/region after it has been configured for the first country/region. You can use one of two configuration methods: 1.
PAGE 8
Patents This device is covered by one or more of the following patents: 6,031,867; 6,012,113; 6,009,082; 5,905,794; 5,864,560; 5,815,567; 5,815,503; 5,812,534; 5,809,068; 5,790,532; 5,764,628; 5,764,627; 5,754,589; 5,724,356; 5,673,268; 5,673,257; 5,644,594; 5,628,030; 5,619,508; 5,617,423; 5,600,649; 5,592,586; 5,577,041; 5,574,725; 5,559,793; 5,546,448; 5,546,395; 5,535,204; 5,500,859; 5,471,470; 5,463,616; 5,453,986; 5,452,289; 5,450,425; D353,598; 5,355,365; 5,309,562; 5,301,274. Other patents pending.