Technical information

10. To find out how much of the update that the controller has performed, type

UPDATE. The controller will respond with "No Update in Progress" when the

update is complete. In addition, the controller will reset the T1 card after

flashing it, causing the card's LEDs to change states.

11. When the update is finished, type T1STATUS location, where “location" is the

specifier of the T1 card you have updated. T1STATUS will show the

firmware version of the T1 card, which should be "1.07c/1.06". If not, try

updating the T1 card once more. If the firmware doesn't seem to be working,

contact Technical Support at the phone number below.

Q17. How do I upgrade the RASExpress software of my CommPlete

RASCard?

A17. First, go to the CommPlete Resources web site at

http://www.multitech.com/support/CommPlete.htm. From there, you can

download the UPGRADE.EXE file for RASExpress. Then, upload the upgrade

file to the RAS card into the same directory that RASEXP.EXE resides. Finally,

telnet to the RAS card. A fourth option will appear, allowing you to upgrade the

server. You can type anything for the upgrade key that RASExpress will ask you

for.

Q18. We have a 10BaseT Controller. When do I know that I need a

100BaseT Controller module and 100BaseT network?

A18. Tests have shown that a 100BaseT Controller greatly improves throughput when

you have 2 or more segments in the CommPlete populated with RASCards.