User guide

RASExpress User Guide
42 CommPlete Communications Server
Call Back Number
To enable callback security, type the user’s callback security phone number in this
field. When a user calls in with a valid user name and password, the RASExpress
server hangs up. Then, after the delay specified in the Call Back Delay field, the
RASExpress server calls back the user at the callback number. This field is valid only
if the Remote User Enter Number field is disabled by selecting OFF.
Call Back Delay
This field sets the time in seconds that the RASExpress Server must wait before
calling back the user. The value entered in this field is valid only if the Remote User
Enter Number field is set to On, or if a phone number has been entered in the Call
Back Number field.
Concurrent Logins
The number of concurrent logins the user is permitted. A value of 0 indicates that
there is no limit on the number of concurrent logins.
Note: For multilink connections, the number of concurrent logins permitted should
be at least the number of links in the multilink bundle.
Static IP Address
The user’s static IP address. A value of 000.000.000.000 indicates no static address.
Edit Permissions
Menu path: Main Menu ➔ Configuration of Server ➔ User Setup ➔ Edit
Permissions
Use the Edit Permissions menu to control the user’s access to the RASExpress server.
To edit user permissions, type R in the User Setup menu and select the user name.
The following menu appears.
[ 1] Mode Permissions
[ 2] Line Permissions
[ 3] Protocol Permissions
[ 4] Time of day Logins
[ 5] Connection time limits
[ 6] Terminal Login
[ 7] Tunneling
F: To Save Modifications
[ESC] to go to previous menu
Type a number to select the user permissions you want to edit. When you have fin-
ished editing permissions for the user, type F to save your modifications. To exit the
menu without saving your modifications, press E
SC.
Mode Permissions
Menu path: Main Menu ➔ Configuration of Server ➔ User Setup ➔ Edit
Permissions ➔ Mode Permissions.
1. Dial Out
2. Dial In Remote Node
3. Dial In Remote Control
4. Telnet To Host
5. Rlogin To Host
D: Delete Esc: Prev Menu