User guide

RASExpress User Guide
22 CommPlete Communications Server
Server Name
Use this field to assign a unique name to the RASExpress server. The server name is
broadcast on the Novell network. It is also used by MultiCommManager to monitor
RASExpress server statistics.
Supervisor Password
Use this field to assign a supervisor password. The password is case-sensitive. It locks
the local console and prevents regular users from running MultiCommManager and
making changes to the RASExpress server.
Log Status
Use this field to enable or disable the call log. The default is disabled. When enabled
is selected, RASExpress logs all calls for one hour in the file yyyymmdd.LOG, where
yyyymmdd is the year, month, and day the log was created. The 24 saved logs for each
date are given the extensions .L00–.L23. When disabled is selected, RASExpress does
not log calls.
Log Start Date
You can start the call log automatically, if it is disabled, by entering the start date in
the format month-day-year. When the date arrives, the log begins at the time specified
in the Log Start Time field.
Log Start Time
Enter the time at which you want the log to automatically start, in the format
hours:minutes:seconds.
Log Number of Days
Specify the number of days ,up to seven, that you want log files to remain on the
server’s hard disk. Log files older than the specified number of days are
automatically deleted. This option prevents old log files from filling the disk.
Write Error Messages into File
Select enabled to have RASExpress save all error and other messages it receives into
a message file. The default is disabled.
Message File
If you select enabled in the previous field, you can assign a name to the message file
in this field. The default file name is SERVER.MSG.
PPP Connection Log
Use this field to enable or disable the PPP connection log.
Screen Saver
RASExpress has a built-in screen saver. Select disabled if you do not want the screen
saver. Select enabled if you do want to use the screen saver. The screen saver appears
only on the monitor connected to the RASExpress server.
Connection Manager Menu
Select enabled to display the Connection Manager menu to a user calling into the
RASExpress server for remote control operation. Select disabled to display the Host
List to the user.
Command to MultiModemManager
This command does not apply to CommPlete Communications Servers.