User guide

RASExpress User Guide
144 CommPlete Communications Server
The WinMCSI Redirector
The WinMCSI modem-sharing program manages access to a modem for inbound and
outbound calls. It allows Windows communications software packages that do not
support INT6B or INT14 to connect to Multi-Tech gateways such as RASExpress. It
also detects other compatible communications servers on your network and displays
the resources they provide to eligible LAN users.
WinMCSI Installation
1. Turn on your client PC, start Windows, and log in to your LAN.
2. Exit all Windows programs except Windows Explorer.
3. Insert the Workstation Redirectors diskette for your operating system into your
floppy disk drive.
4. Choose one of the following operations.
· Windows 3.1x: In the WinMCSI directory, double-click Install.exe.
· Windows 95/98: In the W95MCSI folder, double-click Inst95.exe.
· Windows NT 4.0: In the root folder of Disk 2, double-click Setup.exe.
5. The WinMCSI Setup wizard appears. Follow the instructions in the Setup
wizard to install WinMCSI.
Note: In the Choose the Network Type dialog box, if you choose IP you must
have a TCP/IP protocol active with the default IP router matched with the local
IP address of the RASExpress server.
6. When installation is complete, the COM Port to MCSI Mapping dialog box
appears. You can use this opportunity to map your com ports, or you can close
the dialog box now and map your com ports later in the ComMap program.